Two Component Waterproofing Welflex 801
• Characteristics:
- Waterproof on both reverse and positive sides
- Easy to construct, easy to maintain.
- Protection of mortar and concrete structures.
- Fills crow's feet cracks, not growing cracks.
• Packing and norms:
- 16kg bags and 9 liter cans
- 8kg bags and 5 liter cans
• Meet Vietnamese standards TCVN 7899-2-2008 and ISO 13007-2-2005
Đóng gói: 16kg/bao
Màu sắc: Gray
Welflex 801 is a two-component, jointless, liquid-coated waterproofing membrane, manufactured according to a Thai additive formula based on modified polymers, high strength cement and other special additives. Self-curing properties thanks to moisture.
Welflex 801 is ideal for use on mortar and concrete surfaces to prevent water seepage, underground tanks, water tanks, restrooms, wet areas, roof floors, exposed floors, retaining walls and floors tunnel.
PRODUCT CHARACTERISTICS & APPLICATIONS WELFLEX 801
- Waterproof on both reverse and positive sides
- Easy to construct, easy to maintain.
- Protection of mortar and concrete structures.
- Fills crow's feet cracks, not growing cracks.
SURFACE PREPARATION:
- Remove all porosity, porous concrete, excess mortar that adheres to the surface.
- Clean grease, dirt, mold, cement water, .. off the surface with high pressure water or iron brush combined with detergent.
- Fill the chisel (if any) with concrete repair mortar or other suitable methods.
- Moisten the surface to saturation with clean water before applying WelFlex 801.
- Absorbent surfaces must be completely saturated, free of standing water before applying the first coat of Welflex 801.
HOW TO MIX:
- Under normal circumstances, when all two components are mixed together, an oily paste is formed. Mix in a clean container, slowly add the powder ingredients to the liquid ingredients and stir with a low speed mixer (approximately 500 rpm) stirring until the mixture is uniform (about 3 to 4 minutes). . 5% clean water can be added to the mixture to apply to hygroscopic or dry surfaces.
CONSTRUCTION:
- Use a paint brush or roller to apply WelFlex 801 on the surface to be waterproofed., It is recommended to cover the surface with at least 2 layers to optimize the waterproofing ability.
Apply the first coat while the surface is still damp.
- Proceed to apply the second layer when the first layer has tightened the surface in a direction perpendicular to the first layer
- WelFlex 801 must be used up within 90 minutes of mixing.
MAINTENANCE WORK:
- Usually not necessary, but precautions should be taken if applying in direct sunlight or in a windy location.
- WelFlex 801 waterproofing membrane after construction should be protected from mechanical and physical impacts that may cause tearing or perforation.
CLEANING:
- Clean all tools and equipment with clean water immediately after use. Hardened material can only be cleaned by mechanical means.
STORAGE & STORAGE:
- WelFlex 801 is kept for 12 months from the date of manufacture when in its original condition and properly maintained.
- Storage and preservation: Store in a cool, dry place.
HEALTH & SAFETY:
- Prevention: WelFlex 801's component B has cement-based properties, so it contains alcohol, causing mild skin irritation for people with sensitive skin. Wear gloves and a mask while handling the product.
Projects
Giải pháp kỹ thuật
Lát gạch trên sân thượng hoặc tường ngoài trời
VICIN Việt Nam là đơn vị cung cấp dòng sản phẩm keo dán gạch và keo chà mạch trong Dự án cải tạo và nâng cấp Nhà ga T1, Cảng hàng không quốc tế Nội Bài. Với những tiêu chí về chất lượng hàng đầu, yêu cầu khắt khe về tính thẩm mỹ, độ bền, an toàn và ổn định, keo dán gạch Vicin đáp ứng hoàn hảo được các yêu cầu của dự án.
Thi công lát gạch ở siêu thị, bãi đậu xe, nhà máy
VICIN Việt Nam là đơn vị cung cấp dòng sản phẩm keo dán gạch và keo chà mạch trong Dự án cải tạo và nâng cấp Nhà ga T1, Cảng hàng không quốc tế Nội Bài. Với những tiêu chí về chất lượng hàng đầu, yêu cầu khắt khe về tính thẩm mỹ, độ bền, an toàn và ổn định, keo dán gạch Vicin đáp ứng hoàn hảo được các yêu cầu của dự án.